Re: OT: need advice from machinists

Posted by jfp on September 11, 2005 at 08:22:44 from (205.188.117.6):

In Reply to: OT: need advice from machinists posted by Midwest redneck on September 10, 2005 at 15:50:54:

There is alot of do's and don'ts in starting a small bussiness. The first advice is to listen to BOBMO , he is being straight with you. One reason your current company is selling out is because it is not successful enough in some way. Do not borrow from family or friends .. There are _not many differences between you and your boss. Your boss was willing to start a bussiness and taking a chance on failing or not. It's always like that. I have had 3 of my own fail, but I am learning what makes a go or no-go in it. Do you think I'll give up, not hardly. There are 2 books that you should read ; ( and every one else also ), Rich Dad Poor Dad by Robert Kiyosaki and his fourth book Retire Young Retire Rich. You must read the first in order to understand the fourth book but all are written for easy understanding. You will find he has Christian values and it will open your mind ( & hope ). As for your hourly rates I know framing carpenters that make 50 an hour with less than 1k invested in tools other than a vehicle to haul the stuff. Most just have regular pu or van. My best advice dig all the information you can get, even talking to former companies successful or not. Find to find out what makes go or no-go. Good luck.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]