Re: Who's laboring this weekend ?

Posted by Rod in Smiths Falls, ON, on September 03, 2005 at 16:26:30 from (209.71.222.43):

In Reply to: Who's laboring this weekend ? posted by billyiron on September 03, 2005 at 06:45:09:

Actually, I have my wife tied to a compound mitre saw, cutting vertical t&g sheeting for the dormers on the stone house we are restoring. I get to perch on the roof and nail the boards on with a pneumatic gun.

I'm not quite sure how she does it, but the angles (13 and 31.66 on opposite ends) are coming out exactly right. All I told her is that she needed to be able to read and tell which way is up.

Two dormers down and two to go, two days left in the weekend. I made another 160 sq. ft. of sheeting this morning on the shaper, so we should have enough to finish the job.

And she actually prefers this to lazing around on a boat.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]