Re: 12v 9N - no spark

Posted by Bob N. on August 31, 2005 at 05:26:56 from (12.32.69.14):

In Reply to: Re: 12v 9N - no spark posted by John T on August 30, 2005 at 16:17:11:

John - thanks for the insight. i re-installed the original coil last night and still had no spark. since this coil worked previously ( untill fully up to temperature) i determined my problem had to be in the distributor. And, sure enough, upon inspection i saw the lug from the wire on the condensor was touching the spring on the points...grounding out.

after repositioning the lug i had spark and she fired right up. i've never heard this engine operate so quitely with the new manifold gaskets and tailpipe/muffler.

thanks again...Bob

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]