Re: 12v 9N - no spark

Posted by Bob N. on August 30, 2005 at 13:51:42 from (12.32.69.14):

In Reply to: Re: 12v 9N - no spark posted by Jerry Cent. Mi. on August 30, 2005 at 13:36:12:

the ignition wire runs thru 2 resistors which have been functioning OK. i go from 12 -6v on resistor 1 and from 6-3v. on resistor 2 ( looks like the original resistor) i then drop from 3v to 2v at the lug on the coil.

the frustration stems from the fact the the engine ran prior to the tune up. I changed the points condenser and coil.

with a 12 volt convesion ( Battery, starter & Alternator) should i be using a 12v coil or 6v coil?

thanks

Follow Ups:

• Re: 12v 9N - no spark John T 16:21:39 08/30/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]