Re: hydraulic cylinder on a WD

Posted by jackt on August 30, 2005 at 13:17:33 from (64.48.193.208):

In Reply to: hydraulic cylinder on a WD posted by BobinKY on August 29, 2005 at 17:24:43:

I think you've got two problems going on here. AZ Jack is right about the packing. I use teflon faucet stem packing from the local hardware store--pretty cheap and works well. Need to be sure to clean out all the old stuff first though.

Second, when you say that it bleeds off, are you saying that oil leaks out from the cylinder or do the lift arms go down when the lever is not all the way up? If that's the case, the problem is with your hold position valve. Search the AC forum for a fix for that. I've come up with a better fix (I think) and my loader bucket will stay up for weeks at a time.
Email me at jacktally1@yahoo.com if you want to know more about it.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]