Re: clearance specs for intake and exh valves for

Posted by george md on August 22, 2005 at 22:52:54 from (12.191.226.79):

In Reply to: clearance specs for intake and exh valves for Farm posted by frankiee on August 22, 2005 at 16:00:18:

Frankiee,
If I ever catch anyone in my shop with a feeler
guage in a running engine , I will apply a size 9
squarely in the seat of learning and hoping it goes
all the way to the shoulders. I don't buy feelers
to have them ruined in a running engine.

Hot set on valves means the oil temp is at 140 deg
and then the engine shut down . Bar engine over and
set one cyl at a time when that cyl is at tdc .

george

Follow Ups:

• Re: clearance specs for intake and exh valves for frankiee 09:32:46 08/23/05 (2)
  • Re: clearance specs for intake and exh valves for george md 11:14:58 08/23/05 (0)
  • Re: clearance specs for intake and exh valves for Allan in NE 10:19:56 08/23/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]