Re: stud removal

Posted by JMS/MN on August 13, 2005 at 23:46:27 from (204.73.106.15):

In Reply to: Re: stud removal posted by toolman on August 13, 2005 at 18:25:55:

'Can't do the nut thing- broken below surface of tranny wall'...weld a bolt on the stud.....smaller bolt would fit in there, use mig to attach.... Even if the bolt is broken below the surface, you can still weld a nut in place, without penetrating into the base material. Welding a smaller bolt means you are welding on the outside of the bolt-less material to work with. Another alternative if welding to the old stud does not work is to drill out the stud and re-tap for a larger one.

Follow Ups:

• Re: stud removal toolman 01:50:03 08/14/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]