Re: OT-Stumped with my engine problem

Posted by Greg Co on August 08, 2005 at 15:52:48 from (209.98.53.62):

In Reply to: OT-Stumped with my engine problem posted by Josh H on August 08, 2005 at 04:08:31:

Josh, I agree with some of the others here. It sounds like you have the valves set too tight and they are hanging open.
I would back the nuts off some on the rocker arms. Start the engine, continue to back off the nut on each rocker arm until the rocker arm rattles. When it begins to rattle run the nut back down just until it stops rattling, then slowly give it an additional � to � turn. Repeat this on each rocker arm and then the valves will be set. If this doesn�t fix the problem at least you know the valves are set right and you can move on to the next item. Those 300�s were real good engines and I cant help but to think it is something very simple.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]