|
Tractor Talk Discussion Board |
Re: 220 wire size Hello buickanddeere and T-Bone
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by john in la on July 29, 2005 at 04:12:35 from (67.35.234.62):
In Reply to: Re: 220 wire size Hello buickanddeere and T-Bone posted by buickanddeere on July 28, 2005 at 17:26:38:
"Something doesn't jive." I think you are looking at it wrong. The fan (unit) is 7.8 min and 15 amps max. I take this to mean it is about a 10 amp fan. The heater coil is 50.96 amps so lets say 51 amps. 51 amps + 10 amps = 61 amps
To get breakers to be at 80% use you will need about 76.5 amps worth of breakers.
I have 90 amps. A 60 and a 30. Guess a 50 and a 30 would have worked but this is what they put in it.
The heater has 3 coils.
2 are run by the 60 amp braker and 1 is run by the 30 amp breaker. The fan can be run by either breaker so that it will run in heat pump mode or heater mode. In fact if you look at it this way you really need 90 amps to cover every situation because either breaker will run the fan. 90 amps x .80 = 72 amps
72 amps - 10 amps for fan on 1 breaker - 10 amps for fan on other breaker - 51 amps for the heater = only 1 amp over. From what I have read and found out here I feel my wire choices will work. Thanks for the help.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
