Re: JD 4030 getting water in the oil

Posted by Indydirtfarmer on July 27, 2005 at 19:40:21 from (204.255.238.93):

In Reply to: JD 4030 getting water in the oil posted by Willy P on July 27, 2005 at 18:51:45:

Bet you lunch that you have a pin-hole in a cylinder sleeve. That engine is one of many Deere's that's proned to "wet sleeve pitting". If you have the head back on, remove the oil pan, then pump a few pounds pressure into the cooling system. Look carefully at the sleeves, near the bottom, where they press into the block. (with piston in "up" position) I've seen about a dozen of 'em with that trouble.

Follow Ups:

• Every wet sleeve engine will cavitate pin holes Re buickanddeere 05:58:32 07/28/05 (1)
  • Re: Every wet sleeve engine will cavitate pin hole Indydirtfarmer 18:03:29 07/28/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]