Re: Dismounting old tractor tires

Posted by 8e3k0 on July 21, 2005 at 06:27:07 from (198.161.230.10):

In Reply to: Re: Dismounting old tractor tires posted by ChadS on July 21, 2005 at 05:52:00:

For all rear tractor tire removal we use a front end loader to break the bead. Lay tire and rim flat on any rigid surface preferably concrete and tilt bucket to maximum tilt, use front edge of bucket and push down as close to rim edge as possible. If the old tire is stubborn you may have to move around the rim edge in a couple of different locations. Once the bead releases from that side of the rim , flip tire and rim over and repeat same on the other side. Saves a lot of frustration and grunt work. Ellis

Follow Ups:

• Re: Dismounting old tractor tires chris sweetland 06:58:44 07/21/05 (2)
  • Re: Dismounting old tractor tires Delbert from Lincoln 07:15:36 07/21/05 (1)
    • Re: Dismounting old tractor tires Mike from Cny 21:13:28 07/21/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]