Re: Welder recommendations?

Posted by T_Bone on July 18, 2005 at 01:14:54 from (4.240.132.140):

In Reply to: Welder recommendations? posted by 6N's Short on July 17, 2005 at 11:56:03:

Hi 6N,

Stay way from the small Mig machines. Unless you get into the 250a Mig's your wasting your money unless light gauge welding is all your going to do.

A Miller Thunderbolt AC/DC or Lincolns AC/DC machine is a good home shop machine. You can even add Tig scratch start for under $100.

Gas welding with OXy/Acet can do very thin SM to very heavy plate. It's all in the technique used.

Do a search on the tool forum for hundereds of great threads on welding and consider a course at your local Voc-tech school.

T_Bone

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]