Re: Welder recommendations?

Posted by txgrn on July 17, 2005 at 15:46:11 from (209.151.118.172):

In Reply to: Welder recommendations? posted by 6N's Short on July 17, 2005 at 11:56:03:

Tractor Supply has a little "Farmhand 75" MIG type wire feed welder for about $100 that works pretty good for the price, if you aren't picky. It uses flux wire and doesn't require any gas which is much cheaper and less inconvenient in both mobility and in having to go to the gas (welding) store.

I use it for jobs that you describe. I just set it on the workbench and plug it into 115v and away I go. Real portable (hand caried) and convenient. Again it doesn't do a real pretty weld, but it welds tight and strong and you can grind it if you want it to look pretty. You can weld tin with it or thick stuff....just depends upon how long you stay in one spot depositing wire.

Mark

Follow Ups:

• Re: Welder recommendations? 6N's Short 16:54:23 07/17/05 (1)
  • Re: Welder recommendations? txgrn 17:26:00 07/17/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]