|
Tractor Talk Discussion Board |
Re: fuel tank/danger
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Missouri Boy on July 17, 2005 at 11:30:06 from (204.8.190.192):
In Reply to: Re: fuel tank/danger posted by Nor. Al. on July 17, 2005 at 06:13:10:
Running an exhaust tube into the tank IS NOT a safe way to do it. I have welded several with an electric welder using a stick electrode but now that the Lord has excused my carlessness I owe it to Him to no longer do that. The thing about the exhaust tube is a dangerous myth. I had rather risk building a fire of scrap paper at the filler neck and welding than to risk the dangerous way with exhaust of an engine. Ever hear of an engine popping through the exhaust? Also filling TANK WITH WATER IS ALSO A DANGEROUS MYTH!!!
Follow Ups:
Home
| Forums
Today's Featured Article -
My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
