Re: Allis-Chalmers 1939 B - Muffler

Posted by Mark - IN. on July 13, 2005 at 16:58:04 from (205.188.117.66):

In Reply to: Re: Allis-Chalmers 1939 B - Muffler posted by Key-Mho-Saw-Bee on July 13, 2005 at 16:14:10:

I'm thinking that the pipe diameter should be 1.5" OD. Sounds like you got a stack, not an under the hood. Will be snug, not tight. Should also have a cut into the pipe that goes into the manifold for the bolt to slide up into, so can clamp it with the bolt and washer. May have to file that cutout so bolt will slide up into it.

By the way, stacks are nice, but if you're gonna be around brush or tree limbs, you'll find yourself re-mounting and tightening every day. Spmetimes under hoods are more effective.

Mark

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]