Re: 1975 ford 3000 tractor question

Posted by Gary Mckenzie on July 09, 2005 at 13:24:27 from (24.116.107.28):

In Reply to: 1975 ford 3000 tractor question posted by Darren stephens on July 09, 2005 at 10:42:05:

That is the position control lever. It switches the lift from position control (up) to draft control (down). In position control the height of the lift arms is determined by the position of the control lever. In draft control, the height of the lift arms can vary automatically depending on the load applied. Draft control is primarily used for plowing while position control is used for mowing, using a dirt blade, etc.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]