Re: JDApowerblockheisler

Posted by Leroy on July 05, 2005 at 05:22:39 from (216.255.39.92):

In Reply to: Re: JDApowerblockheisler posted by Leroy on July 05, 2005 at 05:04:21:

Just found my book. The block for the A increased the bore from 5 1/2" and displacement from 321" to 6" & 381" and increased power from 10-18 HP with a 6.5 to 1 ratio. The B went from either 4 1/2" or 4 11/16" to 5" and disp from either 170" or 190" to 216" with 6.7 to 1 and from 8-12 HP increase. The G from 6 1/8" to 6 1/2" and 413" to 464 " and 6.4 to 1 or LP to 7.7 to 1 and from 14 to 23 HP. 50 same as B and 60 same as A. The 70 went from 5 7/8" to 6 1/2" and 380" to 464" with 6.5 to 1 or LP 8.1 to 1 with 12 to 20 HP, LP blocks for A, B, 50 & 60 to 8.0 to 1. The block for the B cost $ 109.50, the A $ 152.00, G $ 214.50, 70 $ 214.50. Hope this is of interest to all.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]