Re: Gettin' Dumber By The Minute

Posted by Chris(WA) on July 02, 2005 at 06:25:52 from (204.182.70.237):

In Reply to: Gettin' Dumber By The Minute posted by Allan in NE on July 02, 2005 at 05:17:59:

Allen,
The grade of the bolt is not coded by the color. The code is in the marks on the head of the bolt.Dashes placed radially around the face of the head. A bolt with no marks is an ungraded or grade two. Three marks is a grade five. Six marks is a grade Eight.Can't say I have ever seen a shear pin that was grade eight. Pretty tough bolt to shear off. Normally see grade two's. You want it to shear if there is a problem. Hope this helps.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]