Re: Help, Ford 3600, Removing Lift Cover

Posted by Kirk Grau on June 26, 2005 at 08:10:01 from (69.170.62.61):

In Reply to: Re: Help, Ford 3600, Removing Lift Cover posted by RickB on June 25, 2005 at 12:57:38:

OK, got my Chinese hoist assembled this morning, now a question I should have asked yesterday. What points can I hoist from?

My service manual talks about a lifting tool, but does not have a picture to look at. My assumption, not having done this before, is that it would mount to the seat attachment points or maybe it is kind of a vise that clamps the sides and is held tight by the weight of the lift cover. I was just going to loop a chain from those same points, but don't want to screw something up too bad.

Thanks for all the help so far.

Kirk

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]