Re: 9N just stall after running a bit.

Posted by steve_ne on June 21, 2005 at 09:57:11 from (64.89.178.205):

In Reply to: 9N just stall after running a bit. posted by San Diego Dude on June 21, 2005 at 08:06:01:

New Points and condinser? Check for voltage after problem begins. I've had this problem before which ended up being an old wire that once heated conducted through the plastic. This wire was the one that runs from the coil to the points. This wire would ground out once it was warm let it cool and would work again.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]