Re: valve guide replacement

Posted by J. Schwiebert on June 13, 2005 at 12:33:49 from (209.143.23.51):

In Reply to: valve guide replacement posted by cjm in wi on June 13, 2005 at 12:06:55:

Once you replace the guides it would be best to grind the valve seats as the new guide may not be concentric with the valve seat. Check your valve springs while you are at it. When you disassemble the head measure the clearance. Maybe the valve stems are worn, maybe valve seals such as a Perfect Circle seal is your solutions. You need to take some measurements first. Questions?

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]