Re: O.T. Sealing a new cement floor

Posted by Coldiron on June 10, 2005 at 20:25:59 from (207.200.116.199):

In Reply to: Re: O.T. Sealing a new cement floor posted by migraine on June 10, 2005 at 18:26:36:

Migrane, I can tell you what not to use, Spenkleglas Kote, A company I worked for put it on their boiler room floor at about 20,000 dollars and it was beautiful. If a fork lift came in the coating rolled up behind it. If water was on it for more than an hour it lifted the coating up where the water was. It was a nightmare. They put an epoxy with coloring in it on the new boiler room floor that was hard as nails and still quite nice to the eye. It was kind of pricy but ten years later is still holding up.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]