need help, have pictures.

Posted by Joe Bloggs on May 28, 2005 at 20:30:08 from (209.247.222.47):

I am trying to set up the hydraulic hoses on my IH 454. I am conecting them to the auxillary control valve. this tractor only has 1. it was set up for a single action cylinder but now I need to have 2 hoses to run a double action cylinder. I put red letters on the hoses so here goes. A i think is the return line but my book says it should be the up preure line.B has a quick disconect fitting. my book says this should be the down presure line and c is the main supplu. so my question is.. if I take out "A" and put my new hose in there what do I do with that hose.
have a look at the second picture it shows where the hoses come out of the side of the transmission.

• here is the link to the pictures

Follow Ups:

• Re: need help, have pictures. donol60 20:01:53 05/31/05 (0)
• Re: need help, have pictures. JMS/MN 14:18:07 05/30/05 (0)
• Re: need help, have pictures. donol60 08:23:27 05/29/05 (1)
  • Re: need help, have pictures. Joe Bloggs 17:52:20 05/29/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]