Re: Honda HT3813 Valve Timing Help

Posted by Bern S on May 22, 2005 at 01:07:34 from (208.245.214.42):

In Reply to: Honda HT3813 Valve Timing Help posted by PaulG1 on May 21, 2005 at 12:53:17:

Timing belt replacement/Valve timing
(From Honda 3813 shop manual)
1. Remove timing belt cover,
loosen the water pump bolts and slide the pump inward. If there is coolant in the engine,temporarily retighten the water pump bolts.
2.Align the "T" mark on the camshaft pulley with the diamond mark on the cylinder block (below camshaft pulley).
3.Align the diamond mark on the crankshaft with the diamond mark on the cylinder block (just above crankshaft pulley).
4. Place the timing belt over the pulleys.
5.Adjust the timing belt tension (.16 to .20 inch deflection), and tighten the water pump
bolts. Be sure to check the timing marks for proper alignment.

Follow Ups:

• Re: Honda HT3813 Valve Timing Help PaulG1 17:38:00 05/22/05 (2)
  • Re: Honda HT3813 Valve Timing Help Bern S 21:53:19 05/22/05 (1)
    • Re: Honda HT3813 Valve Timing Help PaulG1 12:40:12 05/23/05 (0)
• Re: Honda HT3813 Valve Timing Help PaulG1 13:38:21 05/22/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]