Re: hydrolic lift rams stuck on wd45

Posted by jackt on May 09, 2005 at 18:25:54 from (64.48.193.24):

In Reply to: hydrolic lift rams stuck on wd45 posted by bright-orange on May 08, 2005 at 20:10:18:

Sure they're both locked? The way they're originally plumbed is that one is in front of the hold position valve, the other in back. That means that only one cyl does the "hold" work. I'll bet that your hold position valve is out of whack and the internal cam isn't pushing the ball out of its seat. The IT manual has instructions for adjusting and rebuilding the valve. Probably don't need a new pump, but you should most likely replace the hold position spring as they tend to get weak.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]