Re: That EWC hub model should read Q415

Posted by Gerald J. on May 04, 2005 at 10:38:04 from (67.0.108.224):

In Reply to: Re: That EWC hub model should read Q415 posted by Walter on May 04, 2005 at 04:25:16:

I see that. I checked a ten year old or older Baum catalog, didn't help.

You may try to contact Tital Hub at Quincy, they now own Electric Wheel.

For the seal, you may have to measure the hub opening (probably the same size as the bearing cup, but not always) and the shaft where the seal rubs (for most seals) and go looking for a seal by size at a car parts place or the Baum catalog. The bearing parts have numbers that can generally be read and their sizes and replacements determined. Baum's catalog has a very good list of tapered roller bearings and several lists of seals organized by shaft diameter.

Gerald J.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]