Re: wide vs. narrow front

Posted by txgrn on April 28, 2005 at 06:43:46 from (209.151.116.41):

In Reply to: Re: wide vs. narrow front posted by Steve (Magnolia, TX) on April 27, 2005 at 14:40:44:

On your faster turning with the narrow, unless you are turning with the corresponding brake and letting the front swing on it's own, the faster turn in a utility environment is another cause for roll over.

And, in the stability, if a narrow hits a gopher hole your whole front end hit it and it could overturn. On wide, only half of it hit it. Like you said, stability.

And if you are running a loader, you have a rectangular shaped pattern center of gravity box, not a triangular one.

Mark

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]