Re: cub cadet 125

Posted by Red Dave on April 27, 2005 at 07:21:04 from (24.104.94.34):

In Reply to: cub cadet 125 posted by wayne scray on April 26, 2005 at 13:21:40:

Not sure what you want to adjust, but if it is slipping, I think you will have to take it off to work on it.
There are 6 allen screws (two to each hole) to remove it from the crankshaft. After it is off, you can increase the tension on the clutch disk by tightening the flat-headed screws that go through the clutch to the pressure plate.

I suggest you pick up a manual. There should be a description and a diagram in it that you would find very helpful. Try a Cub Cadet dealer or WWWBinderBooks dot com for manuals. (use all lower case)

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]