Re: Loader Bushings

Posted by jdemaris on April 22, 2005 at 20:00:23 from (209.23.28.75):

In Reply to: Loader Bushings posted by PaulW_NJ on April 22, 2005 at 18:00:34:

There are lots of ways to come up with bushings. Most industrial supply companies sell them, e.g. McMaster-Carr at: http://www.mcmaster.com/ , or Enco, etc. McMaster has hardened steel bushings from 3/4" i.d. to 2" i.d. Go to their website and punch in this part number to look at a bushing:
58365k29
You can also buy hardened bushing stock in lengths - but if you only need a few bushings, it's not worth it since the minimum is usally 10' or 20'. This works well if you know someone that stocks the lengths and will cut you off small pieces.
Another option - if you have access to crawler track pins and bushings - and can find the size you need - just slice them down to the length needed.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]