|
Tractor Talk Discussion Board |
case 580 ck model 33 power shuttle problems
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by kcurt on April 14, 2005 at 18:25:53 from (69.240.171.24):
My cousin has a 580 ck loader-backhoe (about 1970) I thing the loader is a model 33, and the backhoe is a 33s. The engine is a diesel, with a converter power shuttle. The loader was working good, but he thought there was water in the converter oil. He drained the power shuttle oil, and filled it with new oil to the full line with out running it. The next day his son got on the backhoe, and resumed digging. It was about a day before he tried to move the backhoe with the transmission. Then he realized the backhoe would not move. My cousin called me, and told me their problem. I told him to add four more quarts of oil. He called me back, and said the backhoe still would not move. I loosened the front tube on the valve body that goes up front to the filter, and cooler. Only little air bubbles came out. We drained the oil again, and put 16 quarts in. It still only had small air bubbles at the front tube. Then we took both tubes off, and put oil in both ports in the valve body. Now at the front port, with the engine running, oil comes out with no air, but only a very small volume of oil. Not even enough oil to fill the tubes. The oil dose not smell burned, and the power shuttle isn�t making any noise. What are our possible problems? In the first chamber where the converter is located, is there supposed to be oil in there? Now there is a little oil coming out of the engine starter, do we have another problem? What type of oil should be in the converter, and power shuttle? Hope some one can help us! Thanks, Russ
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|