Re: JD 90 Skid Steer Onan motor dilemma

Posted by Aaron L. on April 13, 2005 at 00:51:47 from (67.40.106.216):

In Reply to: Re: JD 90 Skid Steer Onan motor dilemma posted by Gerald J. on April 07, 2005 at 08:17:22:

Thanks for the information. I cleaned up the carburetor. I replaced another section of fuel line, and put a new wiring harness in from the operator console to the motor. Fuel was getting there so I check for spark. I was only getting spark on one cylinder. I replaced the spark plug wires and put in new spark plugs (again). Now I can get it to start pretty good, but I've got a power problem. When the clutch is not engaged the motor will run well, but when I engage the clutch it bogs down and I have to nurse it along. I tinkered with the governor a bit and could get a bit more power if I pushed back on one of the governor levers. I don't know how to properly set a governor. If any of you have any suggestions it would be greatly appreciated. Another strange thing is this. When I start to go down hill I will lose power and the engine will cut out.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]