Tractor Talk Discussion Board |
Re: filters
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T_Bone on April 09, 2005 at 07:12:49 from (4.240.42.154):
In Reply to: filters posted by Leo B on April 08, 2005 at 17:46:36:
Hi Leo, The easiest way I solved this decision was to buy a couple different filter brands that I thought I liked, good reputation, and one cheapy brand, then cut the top off and compare the inside results. For less than $20, I had my answer as it's very easy to see the difference between filter brands. From my past filter experience in HVAC, a pleated filter design has alot better filtering qualitys in both liquids and air. As to check valves, bypass valves, just look to see there made to seal and again it's easy to spot the difference of a bad or poor quality design. With OEM filters at a resonable cost and available about anywhere, it's really hard to beat them in both quality and price from what I have found. I didn't use OEM filters in the past because of cost and availabilty. Are there better filters than OEM? Sure but usually at twice the cost. Next question, will I get twice the life out of my engines because of the better filter? Nope and it really doesn't matter if they did on road vehicles as the body and other componets will wear out before the engine does with cheap filters. My experience of using cheap Fram filters over the past 35yrs. I also look at how often I need to change the filters. If I change filters twice a year whats another $20yr in cost for the very best. A good rule of thumb, any filter that claims a better "flow" rate in either air or liquid, vs a OEM filter, has a very poor filtering ability. T_Bone
Follow Ups:
Home
| Forums
Today's Featured Article -
Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|