Pulling force of a tractor

Posted by Mike (Burford) on April 08, 2005 at 10:32:53 from (209.47.108.2):

Good afternoon all,

I am thinking of fabricating my own subsoiler type attachment for my FE-35. I notice most of the comercially available ones have shear pins, I assume to protect the operator when/if the device becomes stuck on a large root or rock in the ground.

Can anyone tell me what a reasonable figure for pulling power (to aid in sizing the shear pin) would be on that FE-35? It is a strong running (just rebuilt head to toe) 4 cylinder Standard diesel.

If anyone has built their own, I would love to talk or see pictures of what you did, and if you would do it again. I know it would more likely be more cost and time effective to buy one, but this is a hobby kind of thing for me.

Your input is greatly appreciated!

Mike

Follow Ups:

• Re: Pulling force of a tractor paul 11:21:34 04/08/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]