Re: cheap way to fix pto

Posted by RodInNS on June 21, 2007 at 18:12:57 from (24.224.246.156):

In Reply to: Re: cheap way to fix pto posted by ford1971 on June 21, 2007 at 14:48:37:

NewHolland dealers ought to carry that sleeve. It's been 15 years since I bought one, and I think it was less than 10 bucks then...
However, I doubt that will work. That's a big jump to make. The shafts that I've seen worn out actually wear the leading edge of the splines off from torque. They don't reduce their diameter. Their "fit" just becomes loose until both the shaft and coupler get worn, and then the lighter couplers will spin on the shaft.
You can try the adapter sleeve if 10 bucks is nothing to you, but I'm reasonably certain it won't go on. The OD on your shaft is still going to be very close to 1-3/8"....

Rod

Replies:

• Re: cheap way to fix pto ford1971 05:54:35 06/22/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]