Re: GMC/Chevy valves

Posted by RJ-AZ on March 31, 2005 at 17:49:31 from (4.240.236.206):

In Reply to: GMC/Chevy valves posted by tlak on March 31, 2005 at 15:45:58:

That lever type spring compressor is about the easiest way to go. You can get one at most any parts store, it is a K-D brand tool that I have had for years. The spark plug air adapter is available through K-D also if you don't have stuff to build your own. I use a regulator and guage on mine to limit the air pressue to just enough to keep the valve in place. Be CAREFUL not to let the air push the piston down past TDC.

Follow Ups:

• Re: GMC/Chevy valves Allan in NE 18:00:37 03/31/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]