|
Tractor Talk Discussion Board |
Hesston 130-90 PTO won't engage
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by CVB on March 28, 2005 at 09:50:51 from (63.162.143.21):
I have a Hesston 130-90 tractor which I bought used in October 2004 (about 3600 hours). All the mechanical systems checked out OK at at the time of purchase. I have not used the tractor in the winter, only started it a few times to keep everything moving. A couple of weeks ago I started it and engaged the PTO lever. The PTO would not spin (and it always had before, although with an audible whirring sound). To make a long story short, I tried to remove a side access plate on the right rear area of the tractor and also the PTO filter. The filter was completely blocked up with crud (plant material, some shavings). I cleaned the filter, hoping that"ll solve the problem. No such luck. I then decided to run the tractor and engage the PTO with the filter off (to see if the hydraulic fluid would pump out). Nothing. If anyone out there has any ideas / experience with this type of problem, I would appreciate any input. Thanks in advance.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Adding an Hour Meter - by Steven Gussey. This article tells how I added an electric hour meter to my 1942 Farmall H after rebuilding it. I wanted to keep an accurate maintenance schedule for my rebuilt engine and the implements I use with my tractor, but the H was never available with a tach
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|