|
Tractor Talk Discussion Board |
Re: Want to build a polebarn, where to start?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hal/WA on March 21, 2005 at 14:31:04 from (148.65.0.200):
In Reply to: Want to build a polebarn, where to start? posted by Mike from cny on March 19, 2005 at 17:23:00:
The very first think I would do is find out what your local government requires you to do in designing and building such a building. They may make you do some things that make the building cost much more than you would think it should. Forewarned is forearmed. If you live in an area with strict code enforcement, it ends up being cheaper to just play their game to begin with, rather than making changes they require. I also would suggest doing an insulation pack/vapor barrier beneath the roof metal. It does not cost that much and is a heck of a lot easier to do while you are putting on the outer metal than it is to try to do it after everything is in place. This insulation/vapor barrier lessens or eliminates the condensation problem on the inside surface. It is a hassle to deal with drips raining down on your stuff inside your building. I always overbuild, which costs a bit more than it might have to. But nothing I have ever built has sagged or fallen down. You also need to consider the possible wind and snow loads and brace accordingly. Undoubtedly when you have the building completed, you will wish you had built it bigger and had done something in a different way. At least that has been my experience. Good luck!
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
