|
Tractor Talk Discussion Board |
Re: OEM diesel pistons sleeves versus aftermarke
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by jdemaris on March 19, 2005 at 20:18:45 from (209.23.29.242):
In Reply to: Re: OEM diesel pistons sleeves versus aftermarke posted by buickanddeere on March 19, 2005 at 07:25:26:
Fuel injectors are usually the least of the problems when it comes to cold-weather starting with the smaller Deere engines. Cold starting was a major issue with Deere engines for many years and we did a lot of experimenting. So did Deere Company. Head gasket thickness, piston standout above block deck, valve-head recess in the cylinder head, distance from top ring groove to head of piston were the major factors we had to deal with. I'm not saying that good injectors aren't necessary, but I've pulled some good starting Deeres and found the injectors to be very bad - half plugged and dribbling fuel with virtually no atomization. As far as the bottom end on this 350, it's fine so far. It's a pretty rugged engine with a massive crank and crank-journals. As far a figuring why he can waste money on engine parts, and not have a block heater? I ask the same d*mn question. He's an old friend, so I guess for that I pay the penalty. I already rebuilt it for him once - more or less for free. He paid for the parts, I donated the labor - and I guess he owes me a favor. Now that he's done it again, one side of me want to tell him to find someone else - but he IS installing a block heater this time. He's a nice guy, and a heck of good stone mason. He helped me finish a large chimney and a brick oven and fireplace, much of which we had to do in the snow. So, he does me favors also.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Haying Before Tractors - by Owen Clark. Hi guys! At age 8 (1927, am now 79) I was learning how to drive a stacker team on the old homemade A-frame wooden stacker, on three of my uncles` dairy farms in Star Valley Wyoming (south of Jackson Hole, on the Wyoming-Idaho border). There was one steam tractor in the Valley, owned by an entrepeneur who used it to run his grain threshing machine, that he hauled from farm to farm for the fall harvest. We used teams of horses not only on the stacker, but on the buckrake to buck the dried
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|