Re: Permatex ?

Posted by Joe (Wa) on March 12, 2005 at 21:00:58 from (67.5.134.80):

In Reply to: Permatex ? posted by msb on March 12, 2005 at 16:26:55:

I don't think you will get anything measureable with permatex. Even non-metallic gasket material is marginal unless you can check the clearance after clamping and add or delete. Compressibility is too unpredictable.

I would use metallic shims. We used to use plastic gaskets on hydraulic pumps & motors for clearances way back when, but they required a specific & accurate torque by application.

Joe

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]