Tractor Talk Discussion Board |
Re: Is running a dozer hard to learn?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by barryinmn on March 07, 2005 at 11:25:37 from (64.90.78.69):
In Reply to: Is running a dozer hard to learn? posted by Thomas2 on March 07, 2005 at 09:09:54:
I bought a JD 350 3 years ago never been on one! I wanted a crawler machine because of getting wheeled machines stuck in mud. The farmer I bought it from put it on my trailer. Took it home crawled it off & promptly cut a snowmobile trail through the woods. 3-4 hours of seat time. It's very easy to cut too deep forward, raise the blade, drop the blade & set up rolling whoop de doos. So watch for that. Back dragging with the blade is easier for inexperienced but takes more time. Dump truck operators can drop the rock & gravel in 6-8" lifts pretty smoothly. Be sure to compact after each lift. Sharp turns on dozers kick up sharp berms quick - planning moves ahead mitigates these clean up areas. Use a tractor with a box blade or landscape rake to set the final surface & then compact. Have fun
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|