Re: Is running a dozer hard to learn?

Posted by RustyFarmall on March 07, 2005 at 10:11:40 from (199.120.81.214):

In Reply to: Re: Is running a dozer hard to learn? posted by Steve (Magnolia, TX) on March 07, 2005 at 09:50:07:

I had a very brief experience with a dozer when I was about 17 or 18. The dozer was an Allis HD14? not sure of that but it was a good sized machine. the first thing I found out was that sitting in the operators seat, I had absolutely no view of what the blade was doing. Just could not see it at all. I had to watch the ground beside me to see how deep I was cutting, and listen to the engine to know how hard it was working. I think I would have eventually learned it, but the man who owned the dozer had a daughter, and she was ready to go see the movie. Seemed like a much better idea than learning to run a dozer.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]