Re: What does a farmall H Weight

Posted by The Dukester on March 01, 2005 at 15:06:44 from (69.54.221.193):

In Reply to: Re: What does a farmall H Weight posted by Dr. Bert on March 01, 2005 at 10:44:14:

Dr. Bert, the weight you mentioned was used when the Farmall H was tested at Nebraska and is somewhat heavier than the average user of this tractor would use. The tractor was loaded to get it's maximum drawbar pull in low gear and nearly if not totally eliminate the possibility of slipping the rear wheels thereby bringing the engine to a near stall. For general work the tractor at this weight would be sluggish and clumsy feeling, especially on soft ground and result in wasted fuel. An H being used for general farm work pulling the implements for which it was designed is usually weighted to around 4400-4500 lbs.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]