Re: Hardfacing Bushhog Blades

Posted by Indydirtfarmer on February 28, 2005 at 09:29:41 from (66.83.236.250):

In Reply to: Hardfacing Bushhog Blades posted by Bill Caldwell on February 27, 2005 at 19:05:46:

I run 2 and some times 3 tractors doing commercial bush hogging. Been at it for years. I've seen every kind of damage to a bushhog blade you could imagine. Bottom line.... The cheaper they are, and the SOFTER they are. the LESS damage they do to the mower, and the less likely they are to BREAK. BTDT....

There is a HUGE difference between speculation, theory, and real world application. Once a blade has been through enough to need radical surgery, it needs to be tossed in the scrap pile, not doctored up and experimented with.

After doing this for years, I've learned a few things too. And what I learned wasn't inside a shop. It was gained on a tractor seat, spinning a bush hog.....

Follow Ups:

• Re: Hardfacing Bushhog Blades Jerry/MT 22:03:42 02/28/05 (1)
  • Re: Hardfacing Bushhog Blades Thordog 08:22:39 03/02/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]