Re: Loading problem

Posted by Don L C on February 26, 2005 at 21:31:27 from (69.133.44.5):

In Reply to: Re: Loading problem posted by Rob in Mo on February 26, 2005 at 15:33:00:

I'll bet you would have enough room if the finders where not on the trailer....you may only have to remove one side.....If this would work, run a piece of angle around the finders for strength and a place to bolt them on with..use 1/2"
grade 8 hard bolts....when you weld the one angle to the trailer...weld "nuts" on the botom side...that way you don't have to hold the nut to remove the finders....SURE IT WILL WORK -- THE LARGER CORSE THE EASYER TO STARTEACH TIME DON'T FOR GET THE W-D40.....

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]