|
Tractor Talk Discussion Board |
Re: Flip over question
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Can't even use my name on February 17, 2005 at 14:26:50 from (216.241.135.173):
In Reply to: Flip over question posted by Dave (IL) on February 15, 2005 at 10:04:13:
So after reading about the Nebraska testing in the post below I thought for a minute... I have seen pictures of the tests being done and with several tractors hooked to the units via the drawbar, obviously this is how they get the drawbar horsepower. Now they run on pavement. I have seen some of these pics where the tires were squatting a god awful amount and you know they are giving it all she has. Yet never have I seen one with a front tire in the air. So I would have to say it is near impossible on flat ground to flip a tractor over backwards if hooked to the draw bar. 3pt very easy if raised but not the draw bar. If you don't think I am correct find some pictures of the tests and look for yourself. There is one on page 8 of the latest Farm Journal magazine but it is a 4wd Deere. Now, someone who has actually had a tractor of a decent size and relatively new hooked to anything via the drawbar and actually raised the front wheels off the ground on flat ground speek up because I wanna know how you did it if the Nebraska testing on that tractor on pavement didn't raise the tires.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Harvestin Corn in Southern Wisconsin: The Early Years - by Pat Browning. In this area of Wisconsin, most crops are raised to support livestock production or dairy herds in various forms. Corn products were harvested for grain, and for ensilage (we always just called it 'silage'). Silo Filling Time On dairy farms back in the 30's and into the first half of the 40's, making of corn silage was done with horses pulling a corn binder producing tied bundles of fresh, sweet-smelling corn plants, nice green leaves with ear; the
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
