|
Tractor Talk Discussion Board |
Re: I.H. Farmall 300U - fair price?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by TDK on February 16, 2005 at 22:21:33 from (152.163.101.7):
In Reply to: I.H. Farmall 300U - fair price? posted by joshua on February 16, 2005 at 18:31:40:
Check steering for looseness. If there is, determine if it is in gearbox or somewhere else. Turn steering wheel lock to lock and see how it feels. Loaders are hard on these gearboxes. Check clutch and brakes for good operation. Do brakes hold OK ? See how much adjustment is left in clutch & brake linkage. If it's very little it could mean clutch and/or brakes will soon be needed. Pull T/A lever back and ride the brakes, T/A should not slip. The 300's are good, tough tractors, but as in all machines there are weak points. In the 300U it's the steering box and the brakes. For the asking price all these things should work acceptably. Send me an email if I can be any more help !
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Massey Ferguson 35 (and up) Tractor Assembly Notes - by Jack Wetmore. These assembly notes are for Massey Ferguson tractors with a two stage clutch and 6 speed, 8 speed and mutli-power transmissions. I see a lot of discussion forum messages regarding damaged clutches from improper assembly. The objective is to have the engine and transmission slide together safely and easily until the gap between the two halves is less than 1/4", BEFORE tightening any of the bolts holding the two together. Using bolts to draw the two halves together will damage the PTO
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|