Re: 350 chevy motor help

Posted by Tim...OK on February 10, 2005 at 14:06:22 from (66.137.61.93):

In Reply to: Re: 350 chevy motor help posted by GregCo on February 10, 2005 at 12:51:21:

Yep weld it..put your pickup in the pump,and swivel it down til it"s obviously too far,set your oil pan to position the pickup,then remove the pan,bump the pickup about 1/4" more for clearance,then just put a good tack on it,with mig or arc turned way down..don"t put too much heat into it or your relief spring will lose it"s springy and your oil pressure will go down the crapper (don"t ask how I know this)..just one healthy little tack is all it needs.
HTH,

Tim

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]