Re: hydraulic help

Posted by Midwest redneck on February 09, 2005 at 16:05:55 from (64.136.27.229):

In Reply to: hydraulic help posted by Dave Null on February 09, 2005 at 03:18:48:

I am trying to see what you need, your post was quite long. To hook up hydraulics for a FEL, I have never had to work on tractor hydraulics. The numbered port you are describing are as follows: (I think they are....#1, pressure port, #2-#3 are return (or tank ports) and the #4 and #5 ports are the cylinder ports. I think that to have a front end loader you will need two valves, one for the lift and one for the tilt of the bucket. Like I said I never worked on tractor hydraulics, mostly machines in industry.
Post again if you need more info.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]