Re: TD 6 wiring harness

Posted by the tractor vet on February 06, 2005 at 21:25:09 from (4.124.88.119):

In Reply to: TD 6 wiring harness posted by Brad in Wa on February 06, 2005 at 17:36:40:

They are not hard to make up since you only have a few wire going out to the engine one wire to the switch over switch two wires going to the gen. a wire from the switch over to the coil one wire from the coil to the dist if ya got a battery ing. a couple more wires here and there . ya need some 10-12 ga. and 14 ga. and since your doing it your choise of color but don't use the same colorson differant things. . My choise wold be a 10 ga. in blue to the armature a yellow in 14 ga. to the field and a black 14 ga. to the switch over .that is i think they come from the factory with. And the loom well you could use the split plastic.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]