Re: GMC Truck Transmission question

Posted by Allan in NE on February 04, 2005 at 09:53:42 from (148.63.132.164):

In Reply to: Re: GMC Truck Transmission question posted by Brokenwrench on February 04, 2005 at 08:55:13:

Yes Sir,

I could never figure that one out and I screamed til I was blue in the face. Total time was 3.9 to R&R, gut it and replace that silly gear.

But, that was GM. They raped their people. In 1999, I went to Ford and worked as a Service Manager. They did the same thing to their people too. :>(

I rebuilt my first automatic transmission in 1959, a cast iron powerglide, and thru the years got to the point where I knew every transmission on the road, down to the last oil circuit and it's mechanical power flow.

Like you, I could tell what was wrong with 'em before I ever lifted the things off the ground. :>)

Built my last 4L60E in 2000 and I don't miss the rascals one little bit. :>)

Thanks for the hollar,

Allan

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]